Installing the towing eye
Remove the towing eye from the vehicle tool kit.
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particularly careful when removing the rear
cover.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.
Press the mark on cover 1 inwards in the
direction of the arrow.
Take cover 1 off the opening.
Screw the towing eye in clockwise to the
stop and tighten it.
See also:
Automatic engine switch-off
The ECO start/stop function switches the
engine off automatically if the vehicle is
braked to a standstill and the brake remains
depressed with the transmission in position
D or N.
You can s ...
Checking tire pressures manually
To determine and set the correct tire
pressure, proceed as follows:
– Remove the valve cap of the tire that is to
be checked.
– Press the tire pressure gauge securely onto
the valve.
– Read t ...
Maximum load rating
WARNING
Do not overload the tires by exceeding the
specified load limit as indicated on the Tire
and Loading Information placard on the
driver's door B-pillar. Overloading the tires
can o ...