Securing the vehicle to prevent it from rolling away
WARNING
Only jack up the vehicle on level ground or on
slight inclines/declines. The vehicle could
otherwise fall off the jack and injure you or
others.
If your vehicle is equipped with a wheel chock, it can be found in the vehicle tool kit.
The folding wheel chock is an additional securing measure to prevent the vehicle from rolling away, for example when changing a wheel.
Fold both plates upwards 1.
Fold out lower plate 2.
Guide the lugs on the lower plate fully into
the openings in base plate 3.
Securing the vehicle on level ground
On level ground: place chocks or other suitable items under the front and rear of the wheel that is diagonally opposite the wheel you wish to change.
Securing the vehicle on slight downhill gradients
On downhill gradients: place chocks or other suitable items in front of the wheels of the front and rear axle.
See also:
Storing wheels
Store wheels that are not being used in a cool,
dry and preferably dark place. Protect the
tires from oil, grease, gasoline and diesel. ...
Closing
WARNING
To prevent possible personal injury, always
keep hands and fingers away from the cargo
compartment opening when closing the
tailgate. Be especially careful when small
children are ar ...
Brake fluid level
If you notice that the brake fluid level in
the brake fluid reservoir has fallen to the
MIN mark or less, check the brake system
immediately for leaks. Also check the
thickness of the brake li ...