Cleaning the display
Before cleaning the display, make sure that
it is switched off and has cooled down.
Clean the display surface using a
commercially-available microfiber cloth
and TFT/LCD display cleaner.
Dry the display surface using a dry
microfiber cloth.
For cleaning, do not use any of
the
following:
• alcohol-based thinner or gasoline
• abrasive cleaning agents
• commercially-available household
cleaning agents
These may damage the display surface. Do not put pressure on the display surface when cleaning. This could lead to irreparable damage to the display.
See also:
Treadwear indicators
Narrow bars (tread wear bars) that are
distributed over the tire tread. If the tire tread
is level with the bars, the wear limit of 1/16 in
(1.6 mm) has been reached. ...
Cleaning the rear view camera
Use clear water and a soft cloth to clean
camera lens 1.
Do not clean the camera lens and the area
around the rear view camera with a power
washer. ...
Brake fluid level
If you notice that the brake fluid level in
the brake fluid reservoir has fallen to the
MIN mark or less, check the brake system
immediately for leaks. Also check the
thickness of the brake lini ...