Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/Stop button repeatedly until all
indicator lamps in the instrument cluster have
gone out. The windshield wipers could
otherwise move and injure you.
Only fold the windshield wipers
away from
the windshield when vertical. Otherwise,
you will damage the hood.
Do not pull the wiper blade.
Otherwise,
the wiper blade could be damaged.
Do not clean wiper blades too
often and
do not rub them too hard. Otherwise, the
graphite coating could be damaged. This
could cause wiper noise.
Fold the wiper arms away from the
windshield.
Carefully clean the wiper blades with a
damp cloth.
Fold the windshield wipers back again
before switching on the ignition.
Hold the wiper arm securely when
folding
back. The windshield could be damaged if
the wiper arm smacks against it suddenly.
See also:
General notes
The LOW RANGE off-road gear assists you in
driving off-road and when fording. When LOW
RANGE is engaged, the engine’s performance
characteristics and the gearshifting
characteristics of the automa ...
Cruise control lever
1 To store the current speed or a higher speed
2 To store the current speed or a lower speed
3 To deactivate DISTRONIC PLUS
4 To store the current speed or to call up the last stored speed
...
Removing/installing the cargo
compartment cover (without integrated
cargo net)
– To remove: make sure that cargo
compartment cover 1 is rolled up.
– Press in end cap 3 of cargo compartment
cover 1 on the right or left side in the
direction of the arrow and press cargo ...