Activating/deactivating PRE-SAFE® Brake

PRE-SAFE® Brake is only available in vehicles with DISTRONIC PLUS.

or Press the button on the or steering wheel to select the DriveAssist button on the steering wheel to select the DriveAssist menu.
or Press to select PRE-SAFE or Brake. to select PRE-SAFE Brake.
. Press The current selection is displayed..
The current selection is displayed.
press To activate/deactivate: press again. again.

When PRE-SAFE® Brake is activated, the multifunction display shows the function is not activated. symbol as long as the HOLD function is not activated.

Vehicles with Parking Guidance: if PARKTRONIC is activated and you are driving at a speed under 22 mph (35 km/h) the symbol for Parking Guidance is displayed symbol for Parking Guidance is displayed instead of the Activating/deactivating ATTENTION ASSIST symbol.

    See also:

    Warning and indicator lamps
    High-beam headlamps ESP® OFF Low-beam headlamps Turn signal ESP® Turn signal ear fog lamp Tire pressure monitor (USA only) SRS ABS Seat belt Front fog lamps Coolant Brak ...

    Calling up a stored parking position setting
    Turn the SmartKey to position 2 in the ignition lock. Adjust the exterior mirror on the frontpassenger side with the corresponding button. Engage reverse gear. The exterior mirror on t ...

    Showing the distance display
    This function is only available with DISTRONIC PLUS. •► Press the button on the steering wheel to select the DriveAssist menu. •► Press the button to select Distance Display. ...