Trip computer "From start" or "From reset"
The values in the From Start submenu are calculated from the start of a journey, while the values in the From Reset submenu are calculated from the last time the submenu was reset.
Press the
or
button on the
steering wheel to select the Trip menu.
Press the
or
button to select
From Start or From Reset.

Trip computer "From start" (example)
1 Distance
2 Time
3 Average speed
4 Average fuel consumption
The From Start trip computer is reset automatically if:
• the ignition has been switched off for more than four hours.
• 999 hours have been exceeded.
• 9,999 miles have been exceeded.
When 9,999 hours or 99,999 miles have been exceeded, the trip computer is automatically reset From Reset.
See also:
Lights
Switching the daytime running lamps on/off
This function is not available in Canada.
If you have activated the Day Lights
function and the light switch is in the
or
position, the daytime runn ...
Introduction
When the automatic transmission is in position D, it is possible to restrict
or derestrict the shift range (). The shift range selected is shown in
the multifunction display. The automatic transmi ...
Turn signal lamps/side marker lamps
► Switch off the lights.
► Open the hood.
► Turn bulb holder 1 (WY 5 W)/2 (3457A)
counter-clockwise and pull it out.
► Remove the bulb from bulb holder 1/2.
► Inse ...
