General notes
The HOLD function can assist the driver in the following situations:
• when pulling away, especially on steep slopes
• when maneuvering on steep slopes
• when waiting in traffic
The vehicle is kept stationary without the driver having to depress the brake pedal.
The braking effect is canceled and the HOLD function deactivated when you depress the accelerator pedal to pull away.
See also:
Folding the exterior mirrors in or out electrically
This function is only available in vehicles for Canada.
Make sure that the SmartKey is in position 1 or 2 in the ignition lock.
Briefly press button 1. Both exterior mirrors fold in or out.
...
Activating/deactivating PRE-SAFE®
Brake
PRE-SAFE® Brake is only available in vehicles
with DISTRONIC PLUS.
Press the or
button on the
steering wheel to select the DriveAssist
menu.
Press or
to select PRE-SAFE
Brake.
Pres ...
Jump-starting
WARNING
Failure to follow these directions will cause damage to the electronic
components, and can lead
to a battery explosion and severe injury or death.
Never lean over batteries while con ...
