Setting a speed

WARNING
Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments.
Increase or decrease the set vehicle speed to a value that the prevailing road conditions and legal speed limits permit. Otherwise, sudden and unexpected acceleration or deceleration of the vehicle could cause an accident and/or serious injury to you and others.

up 1 for a higher speed or down 2 for a lower speed. Press the cruise control lever up 1 for a higher speed or down 2 for a lower speed.
pressed until the desired speed is reached. Keep the cruise control lever pressed until the desired speed is reached.
The new speed is stored. DISTRONIC PLUS Release the cruise control lever.
The new speed is stored. DISTRONIC PLUS is activated and adjusts the vehicle's speed to the new speed stored.

    See also:

    Heavy and light loads
    WARNING Depressing the brake pedal constantly results in excessive and premature wear to the brake pads. It may also cause the brakes to overheat, seriously impairing their effectiveness. ...

    Tire pressure of at least 180 kPa (1.8 bar/26 psi) is not reached
    If, after five minutes, a pressure of 180 kPa (1.8 bar/26 psi) has not been achieved: •► Press the on/off switch on the tire inflation compressor to 0. The tire inflation compressor is swi ...

    Low-beam headlamps
    To switch on the low-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine. Turn the light switch to . The indicator lamp in the instrument cluster light ...