Vehicles with automatic transmission

Shift the transmission to position Apply the parking brake firmly.

P. Shift the transmission to position P.

Using the SmartKey

in the ignition lock and remove it. Turn the SmartKey to position 0 in the ignition lock and remove it.
The immobilizer is activated.

if the The SmartKey can only be removed if the transmission is in position P.

Using KEYLESS-GO

The engine stops and all the indicator Press the Start/Stop button.
The engine stops and all the indicator lamps in the instrument cluster go out.

closed, this When the driver's door is closed, this corresponds to SmartKey position 1. When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey removed".

If you attempt to switch off the engine while the selector lever is in a position other than P, a message appears in the multifunction display and you hear a tone.

    See also:

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are ...

    Cockpit
    1 Combination switch 2 Cruise control lever 3 Instrument cluster 4 Horn 5 Steering wheel paddle shifters 6 DIRECT SELECT lever 7 PARKTRONIC warning display 8 Overhead control panel 9 ...

    Activating the HOLD function
    Make sure that the activation conditions are met. Depress the brake pedal. Quickly depress the brake pedal further until HOLD display 1 appears in the multifunction display. The HOLD ...