Hill start assist
Hill start assist helps you when pulling away forwards or in reverse on an uphill gradient.
It holds the vehicle for a short time after you have removed your foot from the brake pedal.
This gives you enough time to move your foot from the brake pedal to the accelerator pedal and depress it before the vehicle begins to roll.
WARNING
Never leave the vehicle when it is held by hill
start assist. After approximately one second,
hill start assist will no longer brake your
vehicle and it could roll away.
Take your foot off the brake
pedal.
Once you have taken your foot
off the
brake pedal, the vehicle is held for around
one second.
Pull away.
Hill start assist will not function if:
• you are pulling away on a level road or a downhill gradient.
• the transmission is in position N.
• the parking brake is applied.
• ESP® is malfunctioning.
See also:
Seat belt adjustment
The seat-belt adjustment function adjusts the
driver's and front-passenger seat belt to the
upper body of the occupants.
The belt strap is tightened slightly when:
• you engage the belt tongue i ...
Socket in the rear-compartment centerconsole
► Lift up the cover of socket 1. ...
Activating/deactivating the MONO function
This function is only available in vehicles for Canada.
You can use the MONO function to adopt the temperature and air distribution settings
on the driver's side for the front-passenger side.
...
