Defrosting the windshield
You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.
You should only select the
defrosting
function until the windshield is clear again.
Turn the SmartKey to position
2 in the ignition lock.
To activate: press the
button.
The indicator lamp in the button
lights up.
The climate control system switches to the following functions:
• cooling with air dehumidification on
• high airflow
• high temperature
• air distribution to the windshield and front side windows
• air-recirculation mode off
To switch off: press the
button.
The indicator lamp in the button
goes
out. The previously selected settings come
into effect again. The cooling with air
dehumidification function remains on. Airrecirculation
mode remains deactivated.
or
Press the
button.
The indicator lamp in the button
goes
out. Airflow and air distribution are set to
automatic mode.
or
Turn temperature control 1 or 6
clockwise or counter-clockwise.
or
Press the
or
button.
See also:
Tire tread
WARNING
Although the applicable federal motor vehicle
safety laws consider a tire to be worn when
the tread wear indicators (TWI) become
visible at approximately 1/16 in (1.6 mm), we
recomm ...
Cleaning the exhaust tail pipes
Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. You
can restore the original shine of the exhaust
tail pipe b ...
Call priority
When service calls are active, e.g. Roadside
Assistance or MB Info calls, an emergency
call can still be initiated. In this case, an
emergency call will take priority and override
all other ac ...