Notes on using dual-zone automatic climate control
The following contains notes and recommendations on optimum use of dualzone automatic climate control.
• Activate climate control using the
and
buttons. The indicator lamps in the
and
buttons light up.
• Set the temperature to 72 °F (22 °C).
• Only use the "defrosting" function briefly until the windshield is clear
again.
• Only use "air-recirculation" mode briefly,
e.g. if there are unpleasant outside odors
or when in a tunnel. The windows could
otherwise fog up as, in air-recirculation
mode, no fresh air is drawn into the vehicle.
• Use the ZONE function to adopt the
temperature settings on the driver's side
for the front-passenger side as well. The
indicator lamp in the 
button goes
out.
See also:
Tire pressure of 180 kPa (1.8 bar/26 psi) is reached
► Press the on/off switch on the tire
inflation
compressor to 0.
The tire inflation compressor is switched
off.
► Unscrew the filler hose from the valve of
the faulty tire.
...
Setting the airflow
Turn the SmartKey to position
2 in the
ignition lock.
To increase/reduce: press
the or
button.
You can use automatic climate
control to
set the airflow in the rear compartment
sep ...
Activating/deactivating the residual heat function
The residual heat function is only available in
vehicles for Canada with automatic climate
control.
It is possible to make use of the residual heat
of the engine to continue heating the
stati ...