The windshield wipers are obstructed
Leaves or snow, for example, may be obstructing the windshield wiper movement.
The wiper motor has been deactivated.
For safety reasons, you should
remove the SmartKey from the ignition lock.
or
Switch off the engine using the
Start/Stop button and open the driver's door.
Remove the cause of the
obstruction.
Switch the windshield wipers back
on.
See also:
Cargo net
Important safety notes
WARNING
Make sure the cargo net is properly engaged
at top and bottom position and the tightening
belts are securely fastened.
Never use a damaged cargo net.
A ...
Replacing the wiper blades
Moving the wiper blades to a vertical
position
Vehicles without KEYLESS-GO
Turn the SmartKey to position 1 or 2 in the
ignition lock.
Set the windshield wipers to
position .
When the wipe ...
Checking the battery
Press the or
button. The battery is working
properly if battery check lamp 1 lights up briefly
If battery check lamp 1 does not light up briefly during the test, the battery
is discha ...
