Replacing the rear window wiper blade

Removing the wiper blade

Removing the wiper blade
Removing the wiper blade

ignition lock. Remove the SmartKey from the ignition lock.
window until it engages. Fold wiper arm 1 away from the rear window until it engages.
angle to wiper arm 1. Position wiper blade 2 at a right angle to wiper arm 1.
blade 2 in the direction of the arrow until it releases. Hold wiper arm 1 and press wiper blade 2 in the direction of the arrow until it releases.
Installing the wiper blade Remove wiper blade 2.

Installing the wiper blade

wiper arm 1. Place new wiper blade 2 onto wiper arm 1.
blade 2 in the opposite direction to the arrow until it engages. Hold wiper arm 1 and press wiper blade 2 in the opposite direction to the arrow until it engages.
seated correctly. Make sure that wiper blade 2 is seated correctly.
wiper arm 1. Position wiper blade 2 parallel to wiper arm 1.
window. Fold wiper arm 1 back onto the rear window.

    See also:

    Showing the distance display
    This function is only available with DISTRONIC PLUS. Press the or button on the steering wheel to select the DriveAssist menu. Press the or button to select Distance Display. Pre ...

    Daytime running lamps
    Daytime running lamps in Canada The daytime running lamps function is required by law in Canada. It cannot therefore be deactivated. - Turn the light switch to or . With the engine running: de ...

    Using the rear center seat belt
    If the left-hand rear seat backrest is folded down and back up again, the rear center seat belt may lock. The seat belt can then not be pulled out. To release the rear center seat belt: pull out ...