Switching the rear window wiper on/off

Combination switch
1
Switch
2
To wipe with washer fluid
3
To switch on intermittent
wiping
4
To switch off intermittent
wiping
5
To wipe with washer fluid
Turn the SmartKey to position
1 or 2 in the ignition lock.
Turn switch 1 on the combination
switch
to the corresponding position.
When the rear window wiper is switched on,
the icon appears in the instrument cluster.
See also:
Opening and closing
Overhead control panel
1 To raise
2 To open
3 To close/lower
The panorama roof with power tilt/sliding
panel can only be operated when the roller
sunblind is open.
If the front roller ...
Lane Keeping Assist
Important safety notes
Lane Keeping Assist monitors the area in
front of your vehicle by means of a camera at
the top of the windshield. Lane Keeping Assist
detects lane markings on the road an ...
Windshield/headlamp cleaning
system
WARNING
Washer solvent/antifreeze is highly
flammable. Do not spill washer solvent/antifreeze on hot engine parts, because
it may
ignite and burn. You could be seriously
burned.
Use MB Summ ...
