Cornering light function (Bi-Xenon headlamps)

Cornering light function (Bi-Xenon headlamps)
Cornering light function (Bi-Xenon headlamps)

Open the hood. Switch off the lights.
Turn housing cover 1 Open the hood.
counter-clockwise and pull it out. Turn housing cover 1 counter-clockwise and pull it out.
counter-clockwise and pull it out. Turn bulb holder 2 counter-clockwise and pull it out.
2. Take the bulb out of bulb holder 2.
holder 2. Insert the new bulb into bulb holder 2.
and turn it clockwise. Insert bulb holder 2 into the lamp and turn it clockwise.
clockwise until it engages. Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Adaptive Highbeam Assist
    You can use this function to set the headlamps to change between low beam and high beam automatically. The system recognizes vehicles with their lights on, either approaching from the opposite ...

    Control panel for 3-zone automatic climate control
    Control panel for 3-zone automatic climate control Canada only Front control panel 1 To set the temperature, left. 2 To defrost the windshield. 3 To activate/deactivate the residual heat functi ...

    Ashtray in the rear-compartment center console
    Ashtray in the rear-compartment center console To open: pull cover 2 out by its top edge. To remove the insert: press release button 3 and lift the insert up and out. To install the inse ...