High-beam headlamps (halogen headlamps)
High-beam headlamps (halogen headlamps)
Switch off the lights.
Open the hood.
Turn housing cover 1
counter-clockwise and pull it out.
Turn bulb holder 2
counter-clockwise and pull it out.
Take the bulb out of bulb holder
2.
Insert the new bulb into bulb
holder 2.
Insert bulb holder 2 into the lamp
and turn it clockwise.
Align housing cover 1 and turn it
clockwise until it engages.
See also:
Making adjustments in 5 mph (Canada:10 km/h) increments
► Briefly press the cruise control lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Coat hooks on the tailgate
WARNING
The tailgate may close if too great a load is placed on the coat hooks.
You and/or others could be trapped and injured.
Only use the coat hooks for light clothing.
1 Coat hooks ...
Stowage well under the trunk floor
The TIREFIT kit, the vehicle tool kit, etc. are
located in the stowage compartment.
To open: pull handle 1
upwards.
Hook handle 1 into rain trough
2.
Unhook the handle before again
b ...