Cornering light function

Cornering light function
Cornering light function

The cornering light function improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for example. It can only be activated when the low-beam headlamps are switched on.

Active:

• if you are driving at speeds below 25 mph (40 km/h) and switch on the turn signals or turn the steering wheel.

• if you are driving at speeds between 25 mph (40 km/h) and 45 mph (70 km/h) or turn the steering wheel.

Not active: if you are driving at speeds above 25 mph (40 km/h) or switch off the turn signal or turn the steering wheel to the straight-ahead position.

The cornering light function may remain lit for a short time, but is automatically switched off after no more than three minutes.

    See also:

    Determining the correct load limit
    Step-by-step instructions The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traf ...

    Raising the vehicle
    WARNING When jacking up the vehicle, only use the jack which has been specifically approved by Mercedes-Benz for your vehicle. The jack is designed exclusively for jacking up the vehicle at t ...

    Activating/deactivating Blind Spot Assist
    You can use the Blind Spot Assist function to activate or deactivate Blind Spot Assist or Active Blind Spot Assist. Press or on the steering wheel to select the DriveAssist menu. Press ...