High-beam headlamps

headlamps: turn the SmartKey in the ignition lock to position 2 or start To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.
or Turn the light switch to or or . or Press the combination switch beyond.
the pressure point in the direction of arrow 1. Press the combination switch beyond the pressure point in the direction of arrow 1.
In the position, the highbeam headlamps or are only switched on when it is dark and the engine is running. position, the highbeam headlamps are only switched on when it is dark and the engine is running.
The instrument cluster lights up when the high-beam headlamps are switched on. indicator lamp in the instrument cluster lights up when the high-beam headlamps are switched on.
headlamps: move the combination switch back to its normal position. To switch off the high-beam headlamps: move the combination switch back to its normal position.
The instrument cluster goes out. indicator lamp in the instrument cluster goes out.

    See also:

    Important safety notes
    You can limit the opening angle of the tailgate. This is possible in the top half of its opening range, up to approximately 4 in (10 cm) before the stop. Make sure there is sufficient cleara ...

    Removing the mechanical key
    Removing the mechanical key Push release catch 1 in the direction of the arrow and at the same time, remove mechanical key 2 from the SmartKey. ...

    Calling up a stored parking position setting
    •► Turn the SmartKey to position 2 in the ignition lock.•► Adjust the exterior mirror on the frontpassenger side with the corresponding button•► Engage reverse gear. The exter ...