Automatic headlamp mode

headlamp To switch on automatic headlamp mode: turn the light switch to or . or SmartKey in position 1 in the ignition lock:.
SmartKey in position 1 in the ignition lock:
the parking lamps are switched on or off automatically depending on the brightness of the ambient light.
With the engine running: depending on the brightness of the ambient light, the daytime running lamps or the low-beam headlamps are switched on or off automatically.
When the low-beam headlamps are switched on, the the indicator lamp in the instrument cluster lights up.

WARNING
If the light switch is set to or , the or low-beam headlamps will not come on, the low-beam headlamps will not come on automatically if it is foggy. This could endanger you and others. Therefore, turn the light switch to The automatic headlamp feature is only an in fog.
The automatic headlamp feature is only an aid. The driver is responsible for the vehicle's lighting at all times.

    See also:

    Treadwear indicators
    Narrow bars (tread wear bars) that are distributed over the tire tread. If the tire tread is level with the bars, the wear limit of 1/16 in (1.6 mm) has been reached. ...

    Cleaning the trailer tow hitch
    The ball coupling must be cleaned if it becomes dirty or corroded. – Remove rust on the ball of the ball coupling, e.g. with a wire brush. – Remove dirt with a clean, lint-free cloth or a brus ...

    Cleaning the seat covers
    Do not use microfiber cloths to clean genuine leather, artificial leather or Alcantara® covers. If used often, these can damage the cover. Observe the following when cleaning: • clean ge ...