Setting the exterior mirrors

This function is only available in vehicles for Canada.

If the battery has been disconnected or completely discharged, the exterior mirrors must be reset. The exterior mirrors will otherwise not fold in when you select the "Fold in mirrors when locking" function in the on-board computer.

in position 1 in the ignition lock. Make sure that the SmartKey is in position 1 in the ignition lock.
Folding the exterior mirrors in or out automatically Briefly press button 1.

    See also:

    EBD (electronic brake force distribution)
    Observe the "Important safety notes" section. EBD monitors and controls the brake pressure on the rear wheels to improve driving stability while braking. WARNING If EBD has malf ...

    Crash-responsive emergency lighting
    The interior lighting is activated automatically if the vehicle is involved in an accident. •► To switch off the crash-responsive emergency lighting: press the hazard warning lamp button. ...

    Daytime running lamps
    Daytime running lamps in Canada The daytime running lamps function is required by law in Canada. It cannot therefore be deactivated. Turn the light switch to or . With the engine running: d ...