Position of the steering wheel for driving
The steering wheel is moved to the last selected position when:
• the driver's door is closed.
• you insert the SmartKey into the ignition lock.
or
• you press the Start/Stop button once on vehicles with KEYLESS-GO.
When you close the driver's door with the ignition switched on, the steering wheel is also automatically moved to the previously set position.
The last position of the steering wheel is stored after each manual setting or when you store the setting with the memory function.
See also:
Avoiding a section of the route blocked
by a traffic jam
This function blocks a section of the route
ahead of you. You can set the length of the
blocked route section. If possible, COMAND
calculates a detour around the blocked
section of the route.
...
Restarting the tire pressure monitor
WARNING
It is the driver's responsibility to set the tire
pressure to the recommended cold tire
pressure. Underinflated tires affect the ability
to steer or brake the vehicle. You might lose ...
Power washers
WARNING
Do not use power washers with circular-jet
nozzles (dirt grinders) to clean your vehicle, in
particular the tires. You could otherwise
damage the tires and cause an accident.
Always ...