Adjusting the seats electrically
Vehicles without Memory
function: the
seats can be adjusted within three minutes
of a front door being opened.
The time period starts over again if, within these three minutes, you:
• open or close a front door
• insert the SmartKey into the ignition lock or remove it from the ignition
lock
• switch the ignition on or off
If the SmartKey is in position 2 in the ignition lock, the seats can be adjusted at any time.
Depending on the equipment, the seat adjustment buttons are either located on the side of the seat or on the door control panel.

1 Head restraint height
2 Seat cushion angle
3 Seat height
4 Seat fore-and-aft adjustment
5 Backrest angle

1 Seat cushion angle
2 Seat height
3 Seat fore-and-aft adjustment
4 Backrest angle
You can store the seat settings
using the
memory function
AMG vehicles are equipped with a
seat
featuring an integrated head restraint and
the head restraint adjustment button is
deactivated. It is therefore not possible to
set the height and angle of the head
restraint.
See also:
High-beam flasher
- To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
- Pull the combination switch in the direction
of arrow 3. ...
Adaptive Highbeam Assist
You can use this function to set the
headlamps to change between low beam and
high beam automatically. The system
recognizes vehicles with their lights on, either
approaching from the opposite ...
Adjusting the head restraint height electrically
To adjust the head restraint height: slide
the switch for head restraint adjustment
up or down in the direction of
the arrow. ...
