Resetting the panorama roof with power tilt/sliding panel and the roller sunblinds
Reset the panorama roof with power tilt/sliding panel and the roller sunblinds if the panorama roof with power tilt/sliding panel or the roller sunblinds do not move smoothly.
Turn the SmartKey to position
1 or 2 in the ignition lock.
Press the
switch to the point of
resistance in the direction of arrow 2 and
hold it until the panorama roof with power
tilt/sliding panel has opened about 4 in
(10 cm).
Pull the
switch repeatedly to the point
of resistance in the direction of arrow 3
until the panorama roof with power tilt/sliding panel is fully closed.
Keep the
switch pulled for an additional
second.
Press the
switch to the point of resistance
in the direction of arrow 2 and hold it until the sunblinds have opened about 4
in (10 cm).
Pull the
switch repeatedly to the point
of resistance in the direction of arrow 3
until the roller sunblinds are fully closed.
Keep the
switch pulled for an
additional second.
Make sure that the panorama roof
with
power tilt/sliding panel and the roller
sunblinds can be fully opened and closed
again.
If this is not the case, repeat the
steps
above again.
If the panorama roof with power
tilt/sliding panel and the roller sunblind cannot
be fully opened or closed after resetting,
contact a qualified specialist workshop.
See also:
Lap of Luxury
As in the S-Class, the cabin is a highlight of the CL-Class, with
exceptional-quality materials and perhaps the best-executed ambient lighting in
the market, with a line of yellow-orange LEDs that ...
Exterior mirror out of position
If an exterior mirror has been pushed out of position, proceed as follows:
Vehicles without electrically
folding exterior mirrors: move the exterior mirror into the correct position
manually.
...
Monitoring range of the sensors
Blind Spot Assist monitors the area shown in
the figure up to 10 ft (3 m) behind and
immediately adjacent to your vehicle.
WARNING
Blind Spot Assist monitors certain areas in the
im ...