Resetting
Reset the sliding sunroof if it does not move smoothly.
Turn the SmartKey to position
2 in the ignition lock.
Raise the sliding sunroof fully at
the rear.
Keep the
switch pressed for another
second.
Make sure that the sliding sunroof
can be fully opened and closed again.
If this is not the case, repeat the
steps above again.
If the sliding sunroof still
cannot be
opened or closed fully after resetting,
contact a qualified specialist workshop.
See also:
Activating the HOLD function
– Make sure that the activation conditions
are met.
– Depress the brake pedal.
– Quickly depress the brake pedal further
until HOLD display 1 appears in the
multifunction display.
The HOL ...
Switching off the manual drive program
Press the program selector button
repeatedly until C or S
appears in the multifunction display. ...
Stop function
This function is only available in audio DVD
mode.
Switch on audio DVD mode.
To interrupt playback: select
by
sliding and turning
the COMAND
controller and press to confirm.
The disp ...
