Opening and closing
You can continue to operate the
sliding
sunroof after switching off the engine or
removing the SmartKey from the ignition
lock. This function is available for up to five
minutes or until the driver's or frontpassenger
door is opened.

Overhead control panel
1 To raise
2 To open
3 To close/lower
Turn the SmartKey to position
1 or 2 in the ignition lock.
Press or pull the
switch in the corresponding
direction.
If you press the
switch beyond the
point of resistance, an automatic opening/closing process is started in the
corresponding direction. You can stop
automatic operation by operating the
switch again.
When opening and raising the roof,
automatic operation is only available if the
sliding sunroof is in the closed position.
The sun protection cover automatically opens along with the sliding sunroof. You can open or close the sun protection cover manually when the sliding sunroof is raised or closed.
See also:
Overview of Tire Quality Grading Standards
The Uniform Tire Quality Grading is a U.S.
Government requirement. Their purpose is to
provide drivers with consistent and reliable
information regarding tire performance. Tire
manufacturers ...
Transferring data to another system
(vehicle)
Insert/connect the storage medium (SD
card or USB stick) with the saved data into/
to the relevant interface.
Select Vehicle in the main function bar by
turning the COMAND controller and
p ...
Stop function
Press the COMAND controller to
show
the menu.
To interrupt playback: select by
turning
the COMAND controller and
press to confirm.
The display changes to
. The
video image is hidd ...
