Problems with the side windows

Problem: a side window cannot be closed because it is blocked by objects, e.g.

leaves in the window guide.

Close the side window. Remove the objects.
Problem: a side window cannot be closed Close the side window.

Problem: a side window cannot be closed and you cannot see the cause.

WARNING
Closing the side windows with increased force or without the anti-entrapment feature could lead to serious or even fatal injury. Make sure that nobody can become trapped when closing the side windows.

If a side window is obstructed during closing and reopens again slightly:
blocks, pull the corresponding switch again until the side window has closed. Immediately after the window blocks, pull the corresponding switch again until the side window has closed.
The side window is closed with increased force.

If a side window is obstructed again during closing and reopens again slightly:
blocks, pull the corresponding switch again until the side window has closed. Immediately after the window blocks, pull the corresponding switch again until the side window has closed.
The side window is closed without the antientrapment feature.

WARNING
Pulling and holding the switch to close the door window immediately after it had been blocked two times will cause the door window to close without the anti-entrapment feature for as long as you hold the switch.

    See also:

    Additives in gasoline
    One of the main problems of poor fuel quality is the forming of deposits that are caused during the gasoline combustion process. Mercedes-Benz recommends that you use fuel brands that have the add ...

    Cup holders
    Important safety notes WARNING   In order to help prevent spilling liquids on vehicle occupants and/or vehicle equipment, only use containers that fit into the cup holder. Use lids on o ...

    Folding the seats up/down (3rd row ofseats)
    The 3rd row of seats consists of two electrically foldable individual seats, which can be lowered into the cargo compartment. If the seat is not correctly locked in position, the display message ...