Towing a vehicle with both axles on the ground
When having your vehicle towed, observe the important safety notes.
WARNING
The power assistance for the steering and the
brake force booster do not work when the
engine is not running. You will then need
much more effort to brake and steer the
vehicle. Adapt your style of driving
accordingly.
The automatic transmission automatically
shifts to position P when you open the driver's
or front-passenger door or when you remove
the SmartKey from the ignition lock. In order
to ensure that the automatic transmission
stays in position N when towing the vehicle,
you must observe the following points:
– Make sure that the vehicle is stationary and
the SmartKey in the ignition lock is in
position 0.
– Turn the SmartKey to position 2 in the
ignition lock.
On vehicles with KEYLESS-GO, use the key
instead of the Start/Stop button.
– Depress and hold the brake pedal.
– Shift the automatic transmission to
position N.
– Release the brake pedal.
– Release the electric parking brake.
– Switch on the hazard warning lamps.
– Leave the SmartKey in position 2 in the
ignition lock.
When towing with the hazard warning
lamps switched on, use the combination
switch as usual to signal a change of
direction. In this case, only the turn signals
for the desired direction flash. When the
combination switch is reset, the hazard
warning lamps start flashing again.
See also:
Mounting a new wheel
WARNING
Always replace wheel bolts that are damaged
or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive ...
2-zone automatic climate control
Different temperatures can be set for the
driver's and front-passenger sides.
•► Turn the SmartKey to position 2 in the
ignition lock.
•► To increase/reduce: press button 9 or
12 u ...
Adjusting the head restraint heightelectrically
► To adjust the head restraint height:
slide
the switch for head restraint adjustment up or down in the direction of
the arrow. ...