Removing the towing eye
– Loosen the towing eye and unscrew it.
– Attach cover 1 or 2 to the bumper and
press until it engages.
– Place the towing eye in the vehicle tool kit.
See also:
Storing settings
With the memory function, you can store up to three different settings, e.g.
for three different people.
The following settings are stored as a single memory preset:
position of the seat, backr ...
DISTRONIC PLUS displays in the
speedometer
When you switch on DISTRONIC PLUS,
triangle 2 shows the stored speed.
For design reasons, the speed displayed
in the speedometer may differ slightly from
the speed set for DISTRONIC PLUS.
I ...
Removing the ball coupling
– Remove the spring cotter.
– Remove the bolt from the ball coupling
recess.
– Remove the ball coupling from the ball
coupling recess.
– Clean the ball coupling if it is dirty.
Information on ...
