Changing the settings of the locking system
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
To change the setting:
press and hold
down the
and
buttons
simultaneously for approximately six
seconds until the battery check lamp flashes twice.
If the setting of the locking
system is
changed within the signal range of the
vehicle, pressing the
or
button
locks or unlocks the vehicle.
The SmartKey now functions as follows:
To unlock the driver's door:
press the
button once.
To unlock centrally: press
the
button twice.
To lock centrally: press the
button.
The KEYLESS-GO function is changed as follows:
To unlock the driver's door:
touch the inner surface of the door handle on the driver's door.
To unlock centrally: touch
the inner surface of the door handle on the frontpassenger door or the rear
door.
To lock centrally: touch the
outer sensor surface on one of the door handles.
See also:
Important safety notes
WARNING
When opening or closing the door windows,
make sure that there is no danger of anyone
being harmed by the opening/closing
procedure.
The door windows are equipped with
automatic ope ...
Clearing the shift range restriction
Press and hold the selector
lever towards D+ until D is shown once more in the multifunction display.
or
Pull and hold the right-hand
steering wheel paddle shifter until D is shown again in th ...
Checking the coolant level
Only check the coolant level when the vehicle
is on a level surface and the engine has cooled
down.
► Turn the SmartKey to position
2 in the ignition lock.
On vehicles with KEYLESS-GO, ...