Storing the ball coupling

Do not carry the ball coupling in the vehicle WARNING
Do not carry the ball coupling in the vehicle interior if it is not secured.
Otherwise, you and others could be injured by the ball coupling being thrown around if you:
- brake sharply
- change direction suddenly
- are involved in an accident

– Open the stowage well under the cargo compartment floor.
– Remove the protective cap from the ball coupling recess.
– Press the protective cap into the ball coupling recess until it engages.
– Make sure that the protective cap is firmly in place.
– Store the ball coupling in the ball coupling recess with the bolt and spring cotter inserted.

    See also:

    Brake fluid level
    If you notice that the brake fluid level in the brake fluid reservoir has fallen to the MIN mark or less, check the brake system immediately for leaks. Also check the thickness of the brake li ...

    Opening and closing
    Overhead control panel 1. To open 2. To open 3. To close •► Turn the SmartKey to position 1 or 2 in the ignition lock. •► Press or pull the switch in the corresponding di ...

    Important safety notes
    WARNING When operating the climate control, the air that enters the passenger compartment through the air vents can be very hot or very cold (depending on the set temperature). This could ca ...