Problems with Night View Assist Plus

Problem Possible causes/consequences and Solutions
The picture quality of Night View Assist Plus has deteriorated. The windshield wipers are smearing the windshield.
– Replace the wiper blades.
The windshield is smeared after the vehicle has been cleaned in a car wash.
– Clean the windshield.
There is windshield chip damage in the camera's field of vision.
– Replace the windshield.
The windshield is fogged up on the inside.
– Defrost the windshield.
The windshield is iced up.
– De-ice the windshield.
There is dirt on the inside of the windshield.
– Clean the inside of the windshield.
    See also:

    Tire tread
    WARNING Although the applicable federal motor vehicle safety laws consider a tire to be worn when the tread wear indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we recomm ...

    The first 1000 miles (1500 km)
    The more you look after the engine when it is new, the more satisfied you will be with its performance in the future. • Drive at varying vehicle speeds and engine speeds for the first 1000 miles ...

    Running the Numbers
    Thanks to diesel engines' higher efficiency, the Bluetec achieves nearly the same EPA ratings as a Cadillac Escalade Hybrid. The figures are 27 percent better overall than those of the gas GL450, ...