Activating cruise control
You can adopt the current speed if you are driving faster than 20 mph (30 km/h).
– Accelerate the vehicle to the desired
speed.
– Briefly press the cruise control lever
up 1 or down 2.
– Remove your foot from the accelerator
pedal.
Cruise control is activated. The vehicle
automatically maintains the stored speed.
Cruise control may be unable to maintain
the stored speed on uphill gradients. The
stored speed is resumed when the gradient
evens out. Cruise control maintains the
stored speed on downhill gradients by
automatically applying the brakes.
See also:
Engine oil viscosity
Viscosity describes the flow characteristics of a fluid. If an engine oil has
a high viscosity, this means that it is thick; a low viscosity means that it is
thin.
Select an engine oil with an SA ...
Transfer case
This section is only valid for vehicles with 4-
wheel drive (4MATIC). Power is always
transmitted to both axles.
Performance tests may only be carried
out on a 2-axle dynamometer. The brake
...
Removing a wheel
Unscrew the wheel bolts.
Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel
hub threads could otherwise be damaged when you screw them in.
Remove the wheel.
...