Slippery road surfaces
WARNING
The outside temperature indicator is not
designed to serve as an ice-warning device
and is therefore unsuitable for that purpose.
Indicated temperatures just above the
freezing point do not guarantee that the road
surface is free of ice. The road may still be icy,
especially in wooded areas or on bridges.
WARNING
On slippery road surfaces, never downshift in
order to obtain braking action. This could
result in drive wheel slip and reduced vehicle
control. Your vehicle's ABS will not prevent
this type of loss of control.
Drive particularly carefully on slippery road surfaces. Avoid sudden acceleration, steering and braking maneuvers. Do not use the cruise control or DISTRONIC PLUS.
If the vehicle threatens to skid or cannot be
stopped when moving at low speed:
– Shift the transmission to position N.
WARNING
Make sure that you do not endanger other
road users when you apply the brakes.
See also:
Vehicle operation outside the USA and Canada
If you plan to operate your vehicle in foreign
countries, please be aware that:
• service facilities or replacement parts may
not be readily available.
• unleaded fuel for vehicles with a ca ...
Fast forward/rewind
With the display/selection window active,
press the or
button on the
remote control repeatedly until you reach
the desired position.
or
Press and hold the or
button
until the desired ...
Storing and maintaining the current speed
You can store the current speed if you are
driving faster than 20 mph (30 km/h).
Accelerate the vehicle to the
desired speed.
Briefly press the cruise control
lever up 1 or down 2.
Remove ...
