Safety notes

Work improperly carried out on electronic WARNING
Work improperly carried out on electronic components and associated software could cause them to cease functioning. Because the vehicle's electronic components are interconnected, any modifications made may produce an undesired effect on other systems. Electronic malfunctions could seriously impair the operating safety of your vehicle.
Contact an authorized Mercedes-Benz Center for repairs or modifications to electronic components.
Other improper work or modifications on the vehicle could also have a negative impact on the operating safety of the vehicle.
Some safety systems only function when the engine is running. You should therefore never turn off the engine while driving.

Heavy blows against the vehicle underbody or WARNING
Heavy blows against the vehicle underbody or tires/wheels may cause serious damage and impair the operating safety of your vehicle.
Such blows can be caused, for example, by running over an obstacle, road debris or a pothole.
If you feel a sudden significant vibration or ride disturbance, or you suspect that damage to your vehicle has occurred:
- turn on your hazard warning flashers.
- slow down carefully.
- drive with caution to an area which is a safe distance from the road.
Inspect the vehicle underbody and tires/wheels for possible damage. If the vehicle appears unsafe, have it towed to the nearest authorized Mercedes-Benz Center or other qualified maintenance or repair facility for further inspection or repairs.

    See also:

    Adaptive Highbeam Assist
    You can use this function to set the headlamps to change between low beam and high beam automatically. The system recognizes vehicles with their lights on, either approaching from the opposite ...

    Deactivating cruise control
    There are several ways to deactivate cruise control: Briefly press the cruise control lever forwards 3. or Brake. Cruise control is automatically deactivated if: you depress the park ...

    Releasing seat belts
    Press release button 4() and guide belt tongue 2 back towards belt sash guide 1. Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or belt tongue will be trapped ...