Temperature
WARNING 
The temperature grade for this tire is
established for a tire that is properly inflated
and not overloaded. Excessive speed,
underinflation, or excessive loading, either
separately or in combination, can cause
excessive heat build-up and possible tire
failure.
The temperature grades are A (the highest), B, and C. These represent the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.
See also:
Restarting the tire pressure loss
warning system
Restart the tire pressure loss warning system
if you have:
- changed the tire pressure
- changed the wheels or tires
- mount new wheels or tires
– Before restarting, consult the Tire and
Loadi ...
Activating the HOLD function
– Make sure that the activation conditions
are met.
– Depress the brake pedal.
– Quickly depress the brake pedal further
until HOLD display 1 appears in the
multifunction display.
The HOL ...
Cruise control lever
1 To switch on or to increase the speed
2 To switch on or to reduce the speed
3 To deactivate cruise control
4 To switch on with the current speed or
with the last stored speed
When you ...