Hiding display messages

You can hide some display messages with a low priority.

► Press the button on the steering wheel to, select another display. button on the steering wheel to select another display.
or
► Press the R reset button on the instrument cluster.

The display message is cleared.

Display messages with a high priority are shown in red.

You cannot hide display messages of the highest priority. The multifunction display shows these messages continuously until the causes for the messages have been remedied.

    See also:

    Setting the front-compartment temperature using the front control panel
    Turn the SmartKey to position 2 in the ignition lock. To increase/reduce: press the rocker switch up or down. Only change the temperature setting in small increments. Start at 72 °F (22 °C ...

    Opening
    Press the button on the SmartKey. Pull handle 1. Raise the tailgate. Vehicles with the EASY-PACK tailgate: if you pull handle 1 and keep it in this position, you can open the tailga ...

    Importing contacts automatically
    If a mobile phone is connected to COMAND via the Bluetooth® interface, the contacts (phone book entries) of the mobile phone are automatically imported into COMAND's phone book. Depending on ...