Changing the set speed whilethe vehicle is in motion
When DSR is activated, the control speed can be changed to a value between 3 mph and 10 mph (Canada: between 4 km/h and 18 km/h) during the journey.
► To increase or decrease in 1 mph (Canada: 1 km/h) increments: press the cruise control lever to the point of resistance briefly upwards 1 for a higher control speed or briefly downwards 2 for a lower control speed.
The set value appears in the multifunction display.
► To increase or decrease in 5 mph (Canada: 10 km/h) increments: push the cruise control lever beyond the point of resistance briefly upwards 1 for a higher control speed or briefly downwards 2 for a lower control speed.
The set value appears in the multifunction display.
See also:
Brake lamp
- Switch off the lights.
- Open the cargo compartment.
- Open the service flap.
1 Brake lamp
- Turn the bulb holder counter-clockwise and remove it.
- Remove the bulb from the bulb holder.
- I ...
Emergency Tensioning Devices, belt force limiters
The front seat belts and the outer seat belts in the rear are equipped with ETDs
and seat belt force limiters.
The ETDs tighten the seat belts in an accident, pulling them close against the
body. ...
Cleaning the display
– Before cleaning the display, make sure that
it is switched off and has cooled down.
– Clean the display surface using a
commercially-available microfiber cloth
and TFT/LCD display cleaner.
– ...