Trailer towing
When you attach a trailer, make sure you have correctly established the electrical connection. This can be accomplished by checking the trailer lighting. In this event, Blind Spot Assist is deactivated. The indicator lamp in the exterior mirrors lights up yellow and the Blind Spot Assist Currently Unavailable See Operator's Manual message appears in the multifunction display.
You can deactivate the indicator lamps in
the exterior mirrors.
To do so, switch off Blind Spot Assist when:
• the SmartKey is in position 2 in the
ignition lock.
• the engine is not running.
• the electrical connection to the trailer
has been established.
See also:
Drive sensibly – save fuel
Observe the following tips to save fuel:
The tires should always be inflated to the recommended tire pressure.
Remove unnecessary loads.
Remove roof racks when they are not needed.
Warm up t ...
Making adjustments in 5 mph (Canada:
10 km/h) increments
Briefly press the cruise control lever
beyond the pressure point, up 1 for a
higher speed or down 2 for a lower speed.
The last speed stored is increased or
reduced. ...
Engine
Display messages
Possible causes/consequences and Solutions
The yellow
Check Engine warning lamp lights up while the engine is running.
There may be a malfunction, for ex ...
