Defrosting the windshield
You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.
You should only select the defrosting
function until the windshield is clear again.
► Turn the SmartKey to position 2 in the
ignition lock.
► To activate: press the
button.
The indicator lamp in the
button
lights
up.
The climate control system switches to the following functions:
• cooling with air dehumidification on
• high airflow
• high temperature
• air distribution to the windshield and
front side windows
• air-recirculation mode off
► To switch off: press the
button.
The indicator lamp in the
button
goes
out. The previously selected settings come
into effect again. The cooling with air
dehumidification function remains on. Airrecirculation
mode remains deactivated.
or
► Press the
button.
or
► Press the
button.
or
► Turn the temperature control clockwise or
counter-clockwise.
or
► Press the
button.
See also:
Service messages
Information on the type of service and service
intervals (see separate Service Booklet).
You can obtain further information from an
authorized Mercedes-Benz Center or at
http://www.mbusa.com (U ...
Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/Stop but ...
Snow chains
For safety reasons, Mercedes-Benz
recommends that you only use snow chains
which have been specially approved for your
vehicle by Mercedes-Benz, or are of a
corresponding standard of quality.
...
