Activating/deactivating climatecontrol
Important information
WARNING
When the climate control system is
deactivated, the outside air supply and
circulation are also deactivated. Only choose
this setting for a short time. Otherwise the
windows could fog up, impairing visibility and
endangering you and others.
Switch on climate control primarily using
the
button.
Switching the front climate control on/off using the front control panel
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on: press the
button.
The indicator lamp in the
button
lights
up. Airflow and air distribution are set to
automatic mode.
or
► Press the
button.
The indicator lamp in the
button
goes
out. The previously selected settings come
into effect again.
► To switch off: press the
button.
The indicator lamp in the
button
lights
up.
Switching the rear-compartment climate control on/off using the front control panel
2-zone automatic climate control
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on/off: press the
button.
The indicator lamp in the
button
lights
up or goes out.
3-zone automatic climate control
USA only:
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on/off: press the
button.
The indicator lamp in the
button
lights
up or goes out.
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on: press the
button.
ON and MODE are shown in the automatic
climate control display behind the
symbol. The MODE display goes out after
three seconds. The display switches back
to the standard display.
► To switch off: press the
button.
MODE is shown in the display behind the
symbol.
► Press button
.
OFF is shown in the display behind the
symbol.
Switching the rear-compartment climate control on/off using the rear control panel
3-zone automatic climate control
► Turn the SmartKey to position 2 in the
ignition lock.
► Switch on automatic climate control using
the front control panel.
► To switch on: press the
button.
The indicator lamp in the
button
lights
up.
► To switch off: press the
button.
The indicator lamp in the
button
lights
up.
See also:
Additives
Do not use any additives in the
engine oil.
This could damage the engine. ...
Tire ply composition and material
used
Describes the number of plies or the number
of layers of rubber-coated fabric in the tire
tread and sidewall. These are made of steel,
nylon, polyester and other materials. ...
Rolling with the engine switched off
WARNING
There is no power assistance for the steering and the brake when the engine is
not running.
Steering and braking requires significantly more effort and you could lose control
of the ...
