Storing settings
With the memory function, you can store up to three different settings, e.g. for three different people.
The following settings are stored as a single memory preset:
• position of the seat, backrest and head
restraint
• driver's side: steering wheel position
• driver's side: position of the exterior
mirrors on the driver's and front-passenger
sides
WARNING
Do not activate the memory function while
driving. Activating the memory function while
driving could cause the driver to lose control
of the vehicle.
► Adjust the seat.
► On the driver's side, adjust the steering wheel and the exterior mirrors.
► Press memory button M and one of the storage position buttons 1, 2 or 3 within three seconds.
The settings are stored in the selected preset position. A tone sounds when the settings have been completed.
See also:
Driving tips
Kickdown
Use kickdown for maximum acceleration.
► Vehicles for USA: fully depress the
accelerator pedal.
The transmission shifts to a lower gear
depending on the engine speed.
► ...
Diesel Power
The GL350 Bluetec's 3.0-liter diesel V-6 makes 210 horsepower. There's some
familiar diesel clatter when accelerating, though the noise is nothing like an
18-wheeler. The sound is more akin to tha ...
Mounting a new wheel
WARNING
Always replace wheel bolts that are damaged
or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
...