Parking position for the exteriormirror on the front-passenger side
Setting and storing the parking position
You can position the front-passenger side exterior mirror in such a way that you can see the rear wheel on that side as soon as you engage reverse gear. You can store this position.
► Make sure that the vehicle is stationary and that the SmartKey is in position 2 in the ignition lock.
► Press button 2 for the exterior mirror on the front-passenger side.
► Engage reverse gear.
The exterior mirror on the front-passenger side moves to the preset parking position.
► Use adjustment button 1 to adjust the exterior mirror to a position that allows you to see the rear wheel and the curb.
The parking position is stored.
If you shift the transmission to another position, the exterior mirror on the frontpassenger side returns to the driving position.
Calling up a stored parking position setting
► Turn the SmartKey to position 2 in the ignition lock.
► Adjust the exterior mirror on the frontpassenger side with the corresponding button.
► Engage reverse gear.
The exterior mirror on the front-passenger side moves to the stored parking position.
The exterior mirror on the front-passenger side moves back to its original position:
• as soon as you exceed a speed of 6 mph
(10 km/h)
• about ten seconds after you have
disengaged reverse gear
• if you press button 3 for the exterior
mirror on the driver's side
See also:
Important safety notes
WARNING
For safety reasons, switch off the windshield
wipers and remove the key from the ignition
lock before changing the wiper blades
(vehicles with KEYLESS-GO: make sure that
the o ...
Driving on wet roads
Hydroplaning
If water has accumulated to a certain depth
on the road surface, there is a danger of
hydroplaning occurring, even if:
- you drive at low speeds.
- the tires have ad ...
Storing and maintaining the current
speed
You can store the current speed if you are
driving faster than 20 mph (30 km/h).
•► Accelerate the vehicle to the desired
speed.
•► Briefly press the cruise control lever
up 1 or d ...