Switching on/off
The three red indicator lamps in the button indicate the heating level you have selected.
If the battery voltage is too low, the seat
heating may switch off.
One or more of the indicator lamps in the seat heating button are flashing.
Driver's and front-passenger seat
Rear seats
The system automatically switches down from level 3 to level 2 after approximately five minutes.
The system automatically switches down from level 2 to level 1 after approximately ten minutes.
The system automatically switches off approximately 20 minutes after it is set to level 1.
► Make sure that the SmartKey is in
position
2 in the ignition lock.
► To switch on: press button 1 repeatedly
until the desired heating level is set.
► To switch off: press button 1 repeatedly
until all the indicator lamps go out.
See also:
Washing by hand
Carefully remove all deposits of road salt as
soon as possible when driving in winter.
Also, clean the insides of the wheels when
washing the underbody of the vehicle.
•► Do not use hot wa ...
Activation conditions
You can activate the HOLD function if:
Rthe vehicle is stationary.
Rthe engine is running.
Rthe driver's door is closed or if your seat belt is fastened.
Rthe electric parking brake is released.
...
Outside temperature display
The outside temperature display is in the
multifunction display
WARNING
The outside temperature indicator is not
designed to serve as an ice-warning device
and is therefore unsuitable for ...