Changing the settings of the lockingsystem
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
► To change the setting: press and hold
down the 
buttons
simultaneously for approximately six
seconds until the battery check lamp flashes twice.
If the setting of the locking system is
changed within the signal range of the
vehicle, pressing the 
button
locks or unlocks the vehicle.
The SmartKey now functions as follows:
► To unlock the driver's door: press the
button once.
► To unlock centrally: press the
button twice.
► To lock centrally: press the
button.
The KEYLESS-GO function is changed as follows:
► To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door
► To unlock centrally: touch the inner
surface of the door handle on the frontpassenger
door or the rear door.
► To lock centrally: press the locking
button
on one of the door handles.
See also:
Opening and closing the hinged sidewindows
The hinged side windows are operated
electrically from the from the driver's seat.
WARNING
Make sure that nobody can become trapped
as you close the hinged side windows. If there
is a ...
Other bulbs
There are bulbs other than the Xenon bulbs
that you cannot replace. Replace only the
bulbs listed. Have the bulbs that
you cannot replace yourself changed at a
qualified specialist workshop.
...
Maximum permissible gross vehicle
weight rating
The specifications shown on the Tire and
Loading Information placard in the
illustration are examples. The maximum
permissible gross vehicle weight rating is
vehicle-specific and may differ fr ...