Braking
If ABS intervenes when braking, you will feel a pulsing in the brake pedal.
► If ABS intervenes: continue to depress the
brake pedal with force until the braking
situation is over.
► To make a full brake application:
depress the brake pedal with full force.
The pulsating brake pedal can be an indication of hazardous road conditions, and functions as a reminder to take extra care while driving.
WARNING 
Do not pump the brake pedal. Use firm, steady
brake pedal pressure instead. Pumping the
brake pedal defeats the purpose of the ABS and significantly reduces braking
effectiveness.
See also:
Important information
The cooling with air dehumidification function
is only available when the engine is running.
The air inside the vehicle is cooled and dehumidified according to the
temperature
selected.
WARNI ...
Introduction
You can establish a Bluetooth® connection to
the audio system or to COMAND (see the
separate operating instructions).
WARNING
A driver's attention to the road must always
be his/her primary ...
Turn signal lamps/side marker lamps
► Switch off the lights.
► Open the hood.
► Turn bulb holder 1 (WY 5 W)/2 (3457A)
counter-clockwise and pull it out.
► Remove the bulb from bulb holder 1/2.
► Inse ...