Example: step 1 to 3
The following table shows examples on how to calculate total and cargo load capacities with varying seating configurations and number and size of occupants. The following examples use a load limit of 1500 lbs. This is for illustration purposes only. Make sure you are using the actual load limit for your vehicle stated on the vehicle’s Tire and Loading Information placard ().
The higher the weight of all the occupants, the smaller the maximum load for luggage. Further information can be found under "Towing a trailer" ().
See also:
Warning and display messages in the
multifunction display
– Activate ATTENTION ASSIST using the onboard
computer (Y page 232).
Symbol 1 appears in the multifunction
display.
– If necessary, take a break.
– Press or
to confirm the
message.
On l ...
Cleaning the paintwork
Scratches, corrosive deposits, areas affected
by corrosion and damage caused by
inadequate care cannot always be completely
repaired. In such cases, visit a qualified
specialist workshop, e.g. ...
Side marker lamps
- Remove the cover in the front wheel arch.
- Turn cap 2 counter-clockwise and remove it.
- Pull out bulb holder 1.
- Take the bulb out of bulb holder 1.
- Insert the new bulb into bulb holder 1 ...