Restarting the tire pressure loss warning system
Restart the tire pressure loss warning system if you have:
- changed the tire pressure
- changed the wheels or tires
- mount new wheels or tires
- Before restarting, consult the Tire and Loading Information placard on the B-pillar on the driver's side or the tire pressure table on the inside of the fuel filler flap to ensure the tire pressure in all four tires is set correctly for the current operating conditions.
- Observe the notes in the section on tire pressures ().
WARNING
The tire pressure loss warning system can only give reliable warnings if you have set the correct tire pressure.
If an incorrect tire pressure is set, these incorrect values will be monitored.
A tire with insufficient pressure results in vehicle instability when driving, thus increasing the risk of an accident.
- Make sure that the SmartKey is in position 2 () in the ignition lock.
- Press the or button to select the Service menu.
- Press the or button to select Tire Pressure.
- Press the button. The Run Flat Indicator Active Press 'OK' to Restart message appears in the multifunction display.
If you wish to confirm the restart:
- Press the button. The Tire Pressure Now OK? message appears in the multifunction display.
- Press or to select Yes.
- Press the button. The Run Flat Indicator Restarted message appears in the multifunction display.
After a teach-in period, the tire pressure loss warning system will monitor the set tire pressures of all four tires.
If you wish to cancel the restart:
- Press the button.
or
- If the Tire Pressure Now OK? message appears, press or to select Cancel.
- Press the button. The tire pressure values stored at the last restart will continue to be monitored.
See also:
R 350 BlueTEC 4MATIC: as clean as a petrol model
With the R 350 BlueTEC 4MATIC, Mercedes-Benz is offering one of the cleanest
diesel models in the world. The V6 engine achieves an output of 155 kW (211 hp)
and substantial torque of 540 Nm. Compa ...
Clearing the memory of the integrated
garage door opener on the rear-view
mirror
– Turn the SmartKey to position 2 in the
ignition lock.
– Press transmitter buttons 2 and 4.
The indicator lamp lights up yellow.
– Press and hold transmitter buttons 2
and 4 until the indicato ...
Manual interior lighting control
- To switch the front interior lighting on:
set the rocker switch to the
position.
- To switch the front interior lighting off:
set the rocker switch to the
position.
- To switch the rear in ...