Important safety notes

WARNING WARNING

If you tow the vehicle, you must use a rigid towing bar if:

  • the engine is not running.
  • there is a brake system malfunction.
  • there is a malfunction in the power supply or the vehicle's electrical system.

The power assistance for the steering and the brake force booster do not work when the engine is not running. You will need more force to steer and brake, you may have to depress the brake pedal with maximum force.

Before towing away, make sure that the steering can be moved and is not locked. If you tow or tow-start another vehicle, its weight must not exceed the maximum permissible gross vehicle weight of your vehicle.

It is better to have the vehicle transported than to have it towed.

speed of 30 mph (50 km/h) must not be exceeded. You may only tow the vehicle a maximum distance of 30 miles (50 km). A towing speed of 30 mph (50 km/h) must not be exceeded.

For towing distances over 30 miles (50 km), the vehicle must loaded onto a transporter.

could be damaged. Only secure the tow rope or tow bar at the towing eyes. Otherwise, the vehicle could be damaged.

in doubt, recover the vehicle with a crane. Do not use the towing eye for recovery, as this could damage the vehicle. If in doubt, recover the vehicle with a crane.

the vehicles could be damaged. When towing, pull away slowly and smoothly. If the tractive power is too high, the vehicles could be damaged.

Do not tow with sling-type equipment. This could damage the vehicle.

Turn the SmartKey to position 2 in the ignition lock and shift the automatic transmission On vehicles with KEYLESS-GO, use the SmartKey instead of the Start/Stop button. Turn the SmartKey to position 2 in the ignition lock and shift the automatic transmission to N. Then, turn the SmartKey back to 0 and leave it in the ignition lock.

The automatic transmission must be in position N when the vehicle is being towed.

The battery must be connected and charged. Otherwise, you:

  • cannot turn the SmartKey to position 2 in the ignition lock
  • cannot shift the automatic transmission to position N

Release the selector lever lock manually to move it out of position P().

Installing/removing the towing eye Before the vehicle is towed, switch off the automatic locking feature (). You could otherwise be locked out when pushing or towing the vehicle.

    See also:

    Switching on DISTRONIC, storing andmaintaining the current speed
    WARNING   The vehicle can be braked when DISTRONIC is activated. For this reason, deactivate DISTRONIC if the vehicle is to be set in motion by other means (e.g. in a car wash or by tow ...

    Direction of rotation
    Tires with a specified direction of rotation have additional benefits, e.g. if there is a risk of hydroplaning. You will only gain these benefits if the correct direction of rotation is mainta ...

    Stowing a used collapsible spare wheel
    Take the following steps to stow a used collapsible spare wheel. It will otherwise not fit in the spare wheel well. Mercedes-Benz recommends that you have this work carried out at a qualified ...