Charging the battery
WARNING
Never charge a battery still installed in the vehicle unless a battery charger unit approved by Mercedes-Benz is being used. Gases may escape during charging and cause explosions that may result in paint damage, corrosion or personal injury.
A battery charger unit specially adapted for Mercedes-Benz vehicles and tested and approved by Mercedes-Benz is available as an accessory. It permits the charging of the battery in its installed position. Contact an authorized Mercedes-Benz Center for further information and availability.Jump-starting
Charge the battery in accordance with the separate instructions for the battery charger.
WARNING
There is a risk of acid burns during the charging process due to the gases which escape from the battery. Do not lean over the battery during the charging process.
WARNING
Battery acid is caustic. Avoid contact with the skin, eyes or clothing.
Only charge the installed battery with a battery charger which has been tested and approved by Mercedes-Benz. These battery chargers allow the battery to be charged while still installed.
Only use battery chargers with a maximum charging voltage of 14.8 V.
Only charge the battery using the jumpstarting connection point.
The jump-starting connection point is in the engine compartment ().
- Open the hood ().
- Connect the battery charger to the positive terminal and earth point in the same order as when connecting the donor battery in the jump-starting procedure ().
- Read the battery charger's operating instructions before charging the battery.
See also:
S-Class Foundation
The CL-Class is an impressive car for one very good reason: It has everything
that helps the S-Class dominate the full-size luxury-sedan market. Stretched
taut over a coupe form, the sedan's hands ...
Maximum permissible gross vehicle
weight rating
The specifications shown on the Tire and
Loading Information placard in the
illustration are examples. The maximum
permissible gross vehicle weight rating is
vehicle-specific and may differ f ...
Panic alarm
To activate: press button
1 for at least one second.
An alarm sounds and the exterior lighting flashes.
To deactivate: press button
1 again.
or
Insert the SmartKey into the ign ...